EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa. http://www.forensicengineerflorida.com EMA Structural engineers Orlando, Jacksonville, Forensic Engineers Daytona, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa. Fri, 28 Feb 2020 15:21:55 +0000 en-US hourly 1 https://wordpress.org/?v=5.3.4 http://www.forensicengineerflorida.com/wp-content/uploads/2017/08/ema-logo-e1450448030686-2.jpg EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa. http://www.forensicengineerflorida.com 32 32 Electrical Infrared Inspections http://www.forensicengineerflorida.com/2019/09/08/infrared-inspections/ Sun, 08 Sep 2019 16:41:13 +0000 http://www.forensicstructuralengineers.com/?page_id=1320 Infrared inspections. Infrared inspections find hot spots caused by defects in connections and components. Infrared electrical inspection or  thermography is used ...

The post Electrical Infrared Inspections appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>
Infrared inspections.

Infrared inspections find hot spots caused by defects in connections and components. Infrared electrical inspection or  thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared electrical inspection is the best diagnostic tool available for finding these hot connections in the early stages of degeneration. This is why your insurance company may have asked for an electrical infrared inspections, to find and prevent problems before they cause damage to your personnel, equipment and facility, thus reducing downtime and less repair costs to the owners, etc.

Electrical infrared inspections

 

 

 

 Infrared Inspections

should be an integral part of any electrical preventive maintenance (EPM) program. This type of electrical infrared inspections can help save money by verifying equipment is operating at peak efficiency and reducing costly downtime in the event of electrical system failure. It also can help save the costs associated with the damage that a fire may cause if an electrical system overheats or fails catastrophically. This inexpensive inspection program has evolved into a valuable preventive maintenance tool. The following information discusses the benefits of infrared inspection and explains how the inspections are conducted. The heating effect continued to increase past the red, in a region that is now called infrared (“below red”). He measured radiation effects from fires, candles and stoves and deduced the similarity of light and heat. Today, devices can be designed to detect, amplify and display radiation from the visible or infrared portions of the spectrum.Using infrared for electrical infrared inspection and by using infrared technology as part of an electrical infrared inspection program works on the principle that electrical equipment normally gives off heat, but malfunctioning or overloaded electrical equipment will give off excessive heat due to increased electrical resistance. This heat can be detected with the use of infrared inspections. Using an infrared camera or video recorder, the heat can be converted to an image that can be seen and recorded for analysis. The infrared camera can display various temperatures that are being recorded and the temperature differential between “normal” and malfunctioning equipment during. The images can be used to identify exactly what equipment is affected and how serious of a problem exists based on temperatures and temperature differentials. The images can be inserted into a report to help explain the problem and any suggested repairs or improvements. Infrared should be scheduled prior to a major scheduled shutdown. This allows the greatest flexibility in resolving problems found during the inspection. Infrared inspections are a non-destruction test that should be completed during normal business operations while equipment is running at or near capacity. Equipment should run for at least one hour before inspection. There is no need for downtime or special tear-down of the equipment to perform the electrical infrared inspection. However, equipment covers must be removed to ensure effective scanning. Because busway conductors are so close to enclosures, the covers may not need to be removed during infrared inspections for electrical equipments.
http://www.superpages.com/bp/Orlando-FL/ema-forensic-associates-L2570960535.htm

http://www.bizapedia.com/fl/EMA-FORENIC-ASSOCIATES-LLC.html

http://www.hotfrog.com/business/fl/orlando/ema-forensic-associates

https://plus.google.com/100915107618868612119/about

 
 

The post Electrical Infrared Inspections appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>
Flood Damage Inspections http://www.forensicengineerflorida.com/2019/08/24/flood-damage-inspections/ Sat, 24 Aug 2019 23:46:58 +0000 http://www.forensicengineerflorida.com/?page_id=1829 Flood Damage Inspections EMA engineers provide flood damage inspections in Jacksonville, St. Augustine, Palm Coast, Daytona beach, Ormond Beach, Melbourne, Sebastian ...

The post Flood Damage Inspections appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>

Flood Damage Inspections

EMA engineers provide flood damage inspections in Jacksonville, St. Augustine, Palm Coast, Daytona beach, Ormond Beach, Melbourne, Sebastian and surrounding areas.We protect ourself and our clients from the unique challenges posed by flood damaged inspections of damaged buildings.

Hazards in and around flood damage inspections of  buildings include the risks of:

  • growth of large mold colonies;
  • septic system collapse;
  • trip-and-fall injuries;
  • structural collapse;
  • fire and explosions;
  • toxic sludge and materials containing waterborne bacteria; and
  • electrical shock hazards.
 Flood damage inspections
EMA are forensic engineers perform flood damage inspections on commercial and residential structures.

Forensic Flood Damage Inspections

  • Inspect the flood damage inspection building exterior for downed power lines and gas leaks. Gas leaks will smell like rotten eggs. If you suspect a gas leak, contact the utility company immediately.
  • While entering the building, see if the door sticks at the top. If it does, this could mean that the ceiling is ready to collapse. After you open the door, stand outside the doorway, clear of any falling debris.
  • Wear sturdy, treaded boots. According to the American Red Cross, the most common injury following a disaster is cut feet. Broken bottles, nails, glass, and other dangerous debris may litter the floor, and stairs may be very slippery.
  • Once you are inside the home, check for gas leaks again by flood damage inspections. If you smell gas or hear a blowing or hissing noise, open a window and quickly leave the building. Turn off the gas at the outside main valve, if you can, and call the gas company from a neighbor’s home. If you turn off the gas for any reason, a professional must turn it back on. Never use an open flame inside of a flood-damaged house unless you know that the gas has been turned off and the house is ventilated. To inspect for damage, use a battery-powered lantern or flashlight, and not an open flame or electrical fixture in the house.
  • Do not use appliances that may have gotten wet unless you know they have been dismantled, cleaned and dried.
  • Do not work by yourself during flood damage inspections. If you are injured, it might take a long time before you receive assistance. If you must work alone, bring a cell phone or radio so you may call for assistance, if the need arises.
  • Bring a HEPA-rated respirator to use in case you detect extensive mold. If you are asthmatic or otherwise at heightened risk to mold exposure, leave the building. Other inspector-safety equipment, such as gloves and coveralls, may also prevent contact with mold and other contaminants.
  • Florida Flood damage Inspections

  • Examine doors, walls, windows, floors and staircases to make sure that the flood damage inspections of  building shows no signs of potential collapse. Inspect for loose plaster, drywall, and ceilings that may fall. Also, inspect the foundation for evidence of cracks and other structural damage that may render the building uninhabitable.
  • Inspect for fire hazards, such as broken and leaking gas lines, flood damage inspections electrical circuits, and submerged furnaces and electrical appliances. Flammable and explosive materials may travel from upstream. Be aware that fire is the most frequent hazard in homes following floods.
  • Inspect for electrical system damage, such as broken and frayed wires, and burned insulation. You can turn off the electricity at the main fuse box or circuit breaker. If you have to step in water to get to the fuse box or circuit breaker, call an electrician first for advice. Electrical equipment should be inspected by a qualified professional and dried before being returned to service.
  • Inspect for sewage and water supply-line damage. If you suspect sewage lines during flood damage inspections have been damaged, avoid using the toilets and instruct the client to call a plumber before using flood damage inspections. If water pipes are damaged, instruct the client to contact the water utility company and avoid operating the tap.
  • Use caution while inspecting crawlspaces for a variety of reasons, such as the presence of mold, sewage, asbestos, chemicals, rodents, and the risk of structural collapse.
  • Watch out for animals, especially poisonous snakes, which may have been washed into the building during the flood. You can use a stick to poke through debris to check for dangerous critters.

http://www.yelp.com/biz/ema-forensic-engineers-tampa

https://plus.google.com/109108893098752996440/about

The post Flood Damage Inspections appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>
Concrete GPR PT Cable Detection http://www.forensicengineerflorida.com/2019/06/29/concrete-gpr/ Sat, 29 Jun 2019 23:14:59 +0000 http://www.forensicengineerflorida.com/?page_id=2041 Concrete GPR PT Cable Detection Scan Orlando, Tampa (813) 398-5383 Concrete GPR Cable PT Cable detection Scan Tampa, Sarasota, Clearwater, St. ...

The post Concrete GPR PT Cable Detection appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>

Concrete GPR PT Cable Detection Scan Orlando, Tampa (813) 398-5383

Concrete GPR Cable PT Cable detection Scan Tampa, Sarasota, Clearwater, St. Petersburg and surrounding areas can locate rebar and post-tension cables within the concrete using Hilti PS 1000 state of the art technology. Reinforcing steel locations are marked directly on the concrete surface to ensure safe and efficient drilling that will preserve the integrity of the structure and reduce the need for repairs or patching. This helps our clients conduct core drilling without accidents, injuries or delay. Concrete PT Cable detection GPR Scan is also useful when preparing for a renovation that includes electrical outfitting, plumbing, fire protection services, drain installation and duct work.

concrete gpr scan Daytona, tampa
Concrete GPR Scan. EMA perform rebar, PT cable location scanning using hilti PS 1000 in Tampa and surrounding areas

Tampa concrete GPR Scanning
Concrete GPR Scan Tampa, Orlando, Clearwater Using Hilti PS 1000 & Hilti Ferroscan 200s

Concrete GPR EMBEDDED ELECTRICAL SERVICES

When core drilling or saw cutting in commercial and industrial locations is needed, accurate detection of electrical conduits is essential for preventing safety risks, power outages and costly damages. Concrete GPR Scan  for PT Cables Daytona provides two specific but different scanning services in this area: Elevated concrete slab scanning and concrete slab-on-grade locating. Elevated concrete slab scanning involves detecting embedded electrical conduits prior to core drilling a hole through the slab.

Concrete Xray in Tampa
EMA consultants can perform Concrete X-Rays in Tampa, Orlando, Clearwater

Concrete slab-on-grade locating – a concrete slab poured directly over dirt – involves scanning a trench line for conduits before conducting saw cutting and trenching to install a sanitary pipe, water line or something similar. [See diagram No. 2]

CONCRETE GPR ASSESSMENT

Also crucial in the Concrete Xray Scan Daytona imaging process is determining what’s in the concrete structure. This includes gauging the concrete thickness, what the rebar content is, its spacing and its elevation within the slab. This extensive, critical information helps our clients and their teams to understand the makeup of the concrete. we also can determine concrete covers over the rebar using state of the art equipment.

VOIDS DETECTION AND LOCATIONS

We can also locate voids – air gaps between the sub-grade, dirt and the concrete slab-on- grade – hidden below concrete or asphalt surfaces. This degradation occurs over time due to compaction, pipe ruptures or erosion but is often undetectable on the surface. EMA Concrete Xray ground penetrating radar can help our clients locate these areas and – most important – avoid collapses.

While GPR does not determine what type of object is being located project managers are experienced at using all available data in identifying the type of reinforcing steel or electrical conduit present.

The photo to the left shows a typical post tension cable mark out. Using GPR and other data, we are able to locate all of the reinforcing steel anomalies. We then mark the findings on the concrete and, based on the pattern, are quickly able to determine what each marking indicates. Most often, when something is on an angle through a square layout it will be a conduit. You will have a typical rebar pattern with 12-to-18 inch centers. Post tension cables tend to be spaced further apart, depending on the building’s design and whether they are banded or uniform tendons.

The post Concrete GPR PT Cable Detection appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>
Concrete GPR Scan Daytona http://www.forensicengineerflorida.com/2019/06/29/concrete-gpr-scan/ Sat, 29 Jun 2019 22:56:36 +0000 http://www.forensicengineerflorida.com/?page_id=2035 Concrete GPR Scan Daytona Call (321) 355-6052 to schedule your scanning Concrete GPR Scan in Daytona, St. Augustine, Cocoa, Melbourne, and ...

The post Concrete GPR Scan Daytona appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>

Concrete GPR Scan Daytona

Call (321) 355-6052 to schedule your scanning

Concrete GPR Scan in Daytona, St. Augustine, Cocoa, Melbourne, and surrounding areas can locate rebar and post-tension cables within the concrete using Hilti PS 1000 state of the art GPR scan technology. Reinforcing steel locations are marked directly on the concrete surface to ensure safe and efficient drilling that will preserve the integrity of the structure and reduce the need for repairs or patching. This helps our clients conduct core drilling without accidents, injuries or delay. Concrete GPR Scan is also useful when preparing for a renovation that includes electrical outfitting, plumbing, fire protection services, drain installation, and ductwork.

concrete gpr scan Daytona, tampa
Concrete GPR Scan. EMA perform rebar, PT cable location scanning using hilti PS 1000 in Tampa and surrounding areas
Tampa concrete GPR Scanning
Concrete Scan Tampa, Orlando, Clearwater Using Hilti PS 1000 & Hilti ferroscan

CONCRETE GPR SCAN LOCATING EMBEDDED ELECTRICAL SERVICES

When core drilling or saw cutting in commercial and industrial locations is needed, accurate detection of electrical conduits is essential for preventing safety risks, power outages and costly damages. Concrete for PT Cables Daytona provides two specific but different scanning services in this area: Elevated concrete slab scanning and concrete slab-on-grade locating. Elevated concrete slab scanning involves detecting embedded electrical conduits prior to core drilling a hole through the slab.

Concrete Xray in Tampa
EMA consultants can perform Concrete X-Rays in Tampa, Orlando, Clearwater

Concrete slab-on-grade locating – a concrete slab poured directly over dirt – involves scanning a trench line for conduits before conducting saw cutting and trenching to install a sanitary pipe, water line or something similar.

CONCRETE GPR SCAN DAYTONA

Also crucial in the Concrete GPR Xray Scan Daytona imaging process is determining what’s in the concrete structure. This includes gauging the concrete thickness, what the rebar content is, its spacing and its elevation within the slab. This extensive, critical information helps our clients and their teams to understand the makeup of the concrete. we also can determine concrete covers over the rebar using state of the art equipment.

VOIDS DETECTION AND LOCATIONS

We can also locate voids – air gaps between the sub-grade, dirt and the concrete slab-on- grade – hidden below concrete or asphalt surfaces. This degradation occurs over time due to compaction, pipe ruptures or erosion but is often undetectable on the surface. EMA Concrete GPR ground penetrating radar can help our clients locate these areas and – most important – avoid collapses.

COST OF CONCRETE GPR
Concrete rebar GPR testings are less expensive than XRAY due to its accuracy. The equipment is more expensive and a minimum of 2 operators is needed at all times. As a rule of thumb, concrete x-ray will cost double the hourly rate of GPR – although pricing by image may be more attractive for both parties. $150-$170 per image is fairly standard, combined with a mobilization charge of several hundred dollars. Night and weekend work is charged at 1.5 times standard rates which can lead to overtime rates too.

Protection from radiation is an important aspect of industrial radiography. The International Atomic Energy Authority (IAEA) had developed basic safety guidelines regarding the practice.

Rebar, PT Cables GPR Detection Services

https://foursquare.com/v/ema-structural-forensic-engineers/57e262aa498ef4c3cf0558a3

The post Concrete GPR Scan Daytona appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>
Roof Inspections http://www.forensicengineerflorida.com/2019/06/29/visual-roof-inspections/ Sat, 29 Jun 2019 18:41:20 +0000 http://www.forensicstructuralengineers.com/?page_id=1666 Roof Inspections   Roof Inspection Service is recognized by the roofing industry as a vital component of successful Roof Construction Management. ...

The post Roof Inspections appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>

Roof Inspections

Image result for roof inspection
EMA Visual Roof Inspections

 

Roof Inspection Service is recognized by the roofing industry as a vital component of successful Roof Construction Management. Many vital areas of a roof installation are not visible for inspection upon completion and many times are already covered over before periodic site inspections can be made.

Full-time Quality Roof Inspection provides a set of ‘eyes’ during all phases of the installation. Critical areas such as fastening patterns of underlying insulation, mopping techniques, or glue application and drying times can be monitored for compliance with the contract documents and manufacturer’s standards.

Count On EMA Trained Roof Inspections

EMA’s roof inspections by PE engineers provide extensive experience  to observe all phases of a roof installation to ensure materials are in compliance with project documents. Prior to the start of work, our inspectors are provided specifications, drawings, shop drawings and submittals. The inspector’s attendance at the Pre-Job Conference with respective contractual parties allows a thorough understanding of the system installation, set-up areas and anticipated internal disruptions. The inspector generates Daily Roof Inspection Reports which delineates material and installation compliance, and documents any unforeseen contingent items to the contract. Non-compliance issues are immediately addressed with the roofing contractor, design professional or building owner to ensure proper installation of the specified roofing assembly.

The roof and roofing system are checked as part of a Professional Engineer’s roof inspection. The roof keeps rain and other weather elements out of the home or building. The Professional Engineer evaluates the general condition of the roof during roof inspection and estimates the remaining life on the roof. Evidence of past or present roof leakage is also assessed. The engineering report includes an expense analysis of any upcoming roof repair or replacement costs.

Most roofs are made of either asphalt, cedar, slate, or clay tile. If a building has a pitched roof, the roof can be viewed from the site. (It is not advisable to climb onto this type of roof during roof inspections  as a means of checking it. Climbing on the roof can damage roof shingles, especially older shingles. A leakage problem can be created simply by walking on a pitched roof surface.)

roof inspections by P.E florida

Roof Inspections by Licensed P.E

When the Professional Engineer finds that a roof leaks, needs repairs, or will soon need replacement, an analysis of the needed repairs and replacement is provided in the roof inspections report. This helps you plan for any upcoming roof replacement.

If the building has a pitched roof and an accessible attic, the Professional Engineer looks for evidence of roof leakage or damage to the sheathing. The Professional Engineer also looks for problems in the attic such as the amount of insulation present, water damage, and insufficient attic ventilation.

Some roof inspections advocate walking on pitched asphalt, slate, and terracotta tile roofs. There are Inspectors who lift asphalt roof shingles to determine how they were installed. This damages the roof. The slates, cedar shingles, or terracotta tiles suffer damage that can causes leakage.

Asphalt roof shingles are self-sealing. Lifting an asphalt roof shingle damages the seal. Roofing manufacturers will void a roof warranty if they determine damage was caused by such a roof inspections on the roof.

Our Professional Engineers determine the condition of the roof by visual examination. If an Home Inspector needs to walk on the roof or lift the shingles, you should ask; Why can’t this Home Inspector determine the condition of the roof visually?  Can’t this Home Inspector see that the roof shingles are old?

In some cases, it is not possible to safely observe the roof before of during a roof inspections. If the roof is not visible, we us available satellite images of the roof to assess the roof inspections. This includes historical satellite images, which can allow the roof history to be determined.

How to Inspect Roof Types

The first protection any house has against the elements is the roof and there are a variety of roofing materials. You can learn a few basics about each material that will help you spot damage that needs to be repaired or roofing that should be replaced as reported in roof inspections.

Asphalt Roofing

shingle roof inspections

Asphalt roofing surfaces are granular. When asphalt shingles age they become brittle from the sun and other elements. Then the granules can detach from the shingles. Check in the gutters and at the end of the downspouts for asphalt granule deposits. Inspect the roof for spots that look bare where all the granules have detached and been washed away. Also inspect for missing, torn or warped shingles. When the edges or corners of shingles are rising or curling, they have outlived their usefulness and will need replacing. Also look for indentations or punctures from hail damage. This can be far more costly than simply adding shingles so knowing how many layers are on the roof and the legal limitations can be valuable. You can commonly determine how many layers are present by examining the edge of the roof during roof inspections.

Metal Roof Inspections

Metal roofs are commonly steel, copper, aluminum, or galvanized iron. Most metal roofs have a life expectancy of about 50 years. Perforations, pits, rust, or corrosion can help determine the age of the roof. Check the seams, corners, and joints for loose, dried out, or peeling caulk or other seam material while performing roof inspections.

Slate or Clay Tile Roof Inspections

tile roof inspections
ema structural engineers tile roof inspections

Roof Inspections of 3 most common tile roof materials and these are concrete tile, clay or terracotta tile, and composite or light weight tiles. The most common tile is made of concrete and you can identify these roofs by the thickness and absence of color on the bottom or underside of the tiles. They often have 75 years or lifetime warranties. However they can leak sooner depending on the quality of workmanship. Local codes and the area of the country will require these tiles be attached with nails, construction adhesives, battens, screws, foam, or a combination of fasteners noted during roof inspections.

roof inspection for tiled roofs

Composite tile roof inspections are not as popular and are made to resemble clay tile. They are principally installed on homes that lack the structural ability to hold much heavier concrete. Composite tiles also cost less to install.

Clay tile roof inspections comes in two types: terracotta and sand cast. Terracotta tile look just like the material of clay flower pots. Sand cast tiles come in different colors noted during roof inspections.

Slate and clay tile roofs and even cement shingles are designed to last as long as the structure when cared for properly. However they can be broken by hail, ice, or by walking on them. Avoid walking on these materials and use a drone or binoculars to look for any missing tiles or ones that are chipped or broken roof inspections.

Wooden Shakes or Shingles roof inspections

wood shake roof inspections

This is another roofing material you should not be walking on. Inspect these roofs from a ladder, with binoculars or a drone camera. Wooden shakes are split by hand, and wood shingles are sawed and tapered. Weather will deteriorate wood shakes and shingles over time. See if there are missing rotted, warped, or broken shingles or shakes. As a general rule of thumb if a third or more of these roofs are damaged, the whole roof needs replacement.

 

 

 

https://www.merchantcircle.com/ema-structural-forensic-engineers-neptune-beach-fl

https://www.chamberofcommerce.com/neptune-beach-fl/1340732084-ema-structural-forensic-engineers

http://florida.bizhwy.com/ema-structural-forensic-engineers-id47232.php

http://ebusinesspages.com/EMA-Structural-Forensic-Engineers_dzmp1.co?PostReturn=2

https://www.cityfos.com/company/EMA-Structural-Forensic-in-Neptune-Beach-FL-22571754.htm

 

The post Roof Inspections appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>
Roof Moisture Survey http://www.forensicengineerflorida.com/2017/07/20/roof-moisture-survey/ Thu, 20 Jul 2017 21:44:35 +0000 http://www.forensicengineerflorida.com/?p=1872 Roof Moisture Survey Roof Moisture Survey for Commercial Flat roofs. Billions of dollars are lost each year by un warranted flat ...

The post Roof Moisture Survey appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>
Roof Moisture Survey

Roof Moisture Survey for Commercial Flat roofs. Billions of dollars are lost each year by un warranted flat roof replacement on commercial buildings. The Tramex Dec Scanner is a mobile device that is used for detecting moisture underneath the roofing membranes using roof moisture survey for large roof areas.This non-destructive testing method is often combined with electric capacitance/ impedance testing and/or infrared moisture verification testing to accurately identify water entry pathways and areas of entrapped water. EMA can readily perform roof moisture surveys on commercial roof and resport the results to owners, so they know which parts need replacement. The results of the moisture survey can be verified by Infrared roof moisture scanning also.

The Dec Scanner is designed for testing built up roofing and non-conductive single ply membrane. It provides instantaneous, clear indications of roof conditions and is able to detect as little as 2% excess moisture in these large-scale roofing systems.This testing method can be performed in conjunction with, or in certain cases in lieu of infrared thermography in flat roof inspections.

The Tramex Dec Scanner is a mobile non-destructive impedance scanner designed for the instant surveying of moisture conditions in roofing and waterproofing systems per ASTM D7954. Ideal for water leak detection in roofing materials.

Features of Roof Moisture Survey

  • Complies to ASTM D7954
  • Non-destructive impedance moisture meter.
  • Three ranges of sensitivity enabling the inspection of a variety of roof membranes and insulation thicknesses.
  • Ergonomic easy-reach and easy to operate control panel.
  • Leak tracing, water leak detection, problem sourcing, and an instantaneous and clear indication of roof condition.
  • Fast readings over large roof areas in a short time frame.
  • Work in normal daylight hours.
  • Faster and more user friendly than nuclear meters.
  • Easy and safe to use with no regulatory restrictions or operating license required.
  • Dependable solid state circuitry and rugged molded body for long-term reliability.

    orlando roof moisture survey, tampa roof moisture survey
    EMA provides roof moisture survey, flat roof surveys, for residential and commercial structures

Roof Moisture Surveys

Saturated insulation in your roofing system can lead to water intruding your building. When water enters your building, not only can it damage your building’s systems and components, but it can also jeopardize the health and safety of your building’s tenants. Things like black mold can easily form in insulation and on ceiling tiles. When this happens, it can get in the air and tenants can breathe it in, causing major health issues. With an infrared roof moisture inspection, our experts can locate the areas of increased temperature and help you identify water intrusion sites.

http://www.yellowpages.com/orlando-fl/mip/ema-forensic-associates-505571069

http://www.superpages.com/bp/Orlando-FL/ema-forensic-associates-L2570960535.htm

http://www.bizapedia.com/fl/EMA-FORENSIC-ASSOCIATES-LLC.html

http://www.hotfrog.com/business/fl/orlando/ema-forensic-associates

https://plus.google.com/100915107618868612119/about

The post Roof Moisture Survey appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>
Silo Structural Inspection http://www.forensicengineerflorida.com/2016/12/24/silo-structural-inspection/ Sun, 25 Dec 2016 00:23:46 +0000 http://www.forensicengineerflorida.com/?page_id=1816 Silo Structural Inspection Silo structural inspection are for large, static, and non-moving complex and dynamic structural system, flexing and bending under ...

The post Silo Structural Inspection appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>

silo structural inspections florida
Silo inspections throughout Florida, Louisiana & Texas

Silo Structural Inspection

Silo structural inspection are for large, static, and non-moving complex and dynamic structural system, flexing and bending under various loads in ways unapparent to the naked eye. Silos structural inspection are serious structural inspections and EMA understands silos. EMA is committed to the business of silo engineering and silo structural inspections, having designed and assessed hundreds of silos around the world. Our structural engineer team includes registered structural engineers with decades of experience, as well as members of the American Concrete Institute 313 Committee that writes the code for silo design. This diverse expertise allows us to design silos that are practical and economical to construct, and that are configured to withstand years of filling and reclaim and deliver durable structural performance.

 Silo Structural Inspection Florida & Texas

In addition to having a design capability of silos and complex hopper systems, EMA can inspect and perform silo structural inspection of all types and sizes in locations around the world. Large repairs and replacement costs are often operationally problematic and difficult to justify. Our structural engineers focus on realistic, practical recommendations that balance the need for rigorous assessment with the need for continued operations. We work with owners to determine the appropriate levels of investigation for silo structural inspection for each unique facility. And we conduct inspections with an eye to minimizing impact to your process.

Because we have expertise at both silo design and silo structural inspection and assessment, we offer unique advantages in both disciplines. Our inspection experience has taught us what works well in silo design, and which practices may lead to deterioration and failure, Hence a silo structural inspection is required for all silos and stacks. And our design expertise means we know what to look for beyond the surface, so we can focus our inspections on root causes and design repairs that address the source of deterioration. Regardless of the commodity handled, whether you are an owner, operator, or constructor, our experience with over hundreds of silo structural inspection can help you economically construct and maintain silos that will perform reliably in the long term after a  structural inspection.

Concrete, Steel Silo Structural Inspection

Prevention is the most effective method to ensure the integrity of concrete and steel structures, surfaces, and silos. A proactive maintenance and silo inspection program is crucial to increase the life of your concrete and ensure the safety of those working around your structures.

Regular silo inspections, on annual, two- or five-year intervals, can help identify issues that increase the risk of structure collapse. Based on inspection results, preventative maintenance can be performed to avoid larger more expensive repairs later. The cost of preventive maintenance and repair is minimal when compared to the financial and physical toll that a full collapse can have on your company and team.

A proactive safety program should always include annual or semi-annual silo inspections to check for concealed damage and to assess visible problems that could lead to structural failure.

Silo Inspections Can Prevent Collapse

Silo Inspection Prevents Collapse
silo structural inspection

Collapses are often the result of preventable structural failures that would have been identified during routine inspection. Common issues that cause concrete structure and concrete silo failure include foundation deterioration, roof collapse due to roof beam structural issues, improper material filling and unloading procedures in silos, silo wall delamination or deterioration, silo discharge cone or bin floor issues. Steel silos suffer from corrosion, which can be inspected using wear-measure thickness ultrasonic gauges.

Much of this damage is easily preventable through routine silo inspection and maintenance. Third-party inspections, maintenance and repair services are the best way to manage safety on any scale. Many structural issues can be easily and economically addressed if caught early.

Silo Inspection Prevents  Problem

The bad news is that a silo structural inspection may present you with problems that need to be solved as soon as possible. The silo structural inspection may reveal that there is extended damage within the structure’s walls. You might even find out that the silo is simply not stable and needs to be taken down. From a business perspective, it seems like few things could possibly be worse. Consider, however, that identifying these problems before true tragedy strikes is certainly worth the investment. Not only will your company’s reputation remain secure in the absence of a horrible accident, but most importantly, no one will be put in danger on the site.

Silo structural inspections don’t have to be bad news, of course. A silo inspection may show that your silo is in good health and that it can stay that way so long as it is maintained well. This is not just good financial news but it also will give everyone in your company a very real peace of mind.

Maintain
Once any problems are solved and production returns to normal, the most important thing is silo maintenance. Just like with inspection, maintenance should be executed inside and outside of the structure. The following are some of the steps you can take, with a professional, to help maintain the health of your silo.

Silo/Bin Cleaning
It does not take long for material to build up inside of a silo, especially if moisture gets added into the mix. Scheduling a regular cleaning of your storage vessel helps ensure that material will continue to flow through and your production levels will remain uninterrupted.

Media Blasting
Abrasive blasting or dry ice blasting may be needed if you want to smooth a surface, clean a surface, or prepare a surface for a new coat of paint. Formerly referred to as sand blasting, there are now several safer materials that can be used that also reduce the need for clean-up after the project is complete.

Fire Suppression
Especially if a vessel is storing dry material, the risk for fire is very real. Make sure that oxygen is vacuumed out of your storage vessel to help make sure that there is no risk of fire being started due to static electricity or some other type of spark.

The better care you take of your health, the less severe and less numerous your problems will be. It is no different for your silo, bin, or any other type of storage vessel. Schedule regular check-ups to make sure no big problems are brewing. Make sure you catch any small problems before they start. Regularly maintain the unit through silo structural inspection so that you can help prevent any issues in the future. An ounce of prevention is worth a pound of cure, as the old saying goes. An ounce of prevention can even help save the lives of your workers. It’s definitely worth your time.

http://www.yellowpages.com/orlando-fl/mip/ema-forensic-associates-505571069

http://www.superpages.com/bp/Orlando-FL/ema-forensic-associates-L2570960535.htm

http://www.bizapedia.com/fl/EMA-FORENSIC-ASSOCIATES-LLC.html

http://www.hotfrog.com/business/fl/orlando/ema-forensic-associates

https://plus.google.com/100915107618868612119/about

http://www.hotfrog.com/business/fl/melbourne/ema-structural-forensic-engineers_42294919

http://tupalo.com/en/melbourne-florida/ema-structural-forensic-engineers

http://www.zipleaf.us/Companies/EMA-Structural-Forensic-Engineers_24125

http://www.bigwigbiz.com/records.php?opt=search&id=67373

http://www.wampit.com/EMA-Structural-Forensic-Engineers-6465762.html

http://www.expressbusinessdirectory.com/Companies/EMA-Structural-Forensic-Engineers-C366421

The post Silo Structural Inspection appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>
Forensic Engineers Melbourne http://www.forensicengineerflorida.com/2016/10/12/forensic-engineers-melbourne/ Wed, 12 Oct 2016 18:50:49 +0000 http://forensicengineerflorida.com/?p=1785 Forensic Engineers Melbourne EMA provides expert forensic engineers Melbourne to our clients An outstanding application of EMA Engineering’s expertise is Forensic ...

The post Forensic Engineers Melbourne appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>
Forensic Engineers, Damage inspections
Forensic Engineer building damage inspections.

Forensic Engineers Melbourne

EMA provides expert forensic engineers Melbourne to our clients

An outstanding application of EMA Engineering’s expertise is Forensic Engineering and Building Damage Assessment.

Highly experienced forensic engineers with engineering experience and engineering staff are available for investigation, diagnosis, assessment and remediation advice covering, buildings and structures for damage of all types. We have experience of providing damage assessment and inspections after major hurricanes including Andrew, Charlie, Katrina & Rita.

We are trusted by the architects, property owners, builders, insurers and loss adjusters to establish the root cause of building and structural failures and to determine cost effective remedial works.

  • Structural / Building Assessments, Inspections and Investigations.
  • Investigation and damage assessment of all types of buildings and structures, retaining walls, pavements, water tanks and swimming pools.
  • Expert Witness and Reporting service for legal proceedings and court hearings.
  • Building and Structural Defects and Damage Causation investigation and reporting.
  • Cause of damage determination and repair specification for the insurance industry.
  • Remediation advice and disaster assessment following fire, storm, earthquake and flood events.
  • Pre-purchase building inspections for residential, commercial and industrial properties.
  • Preventative risk assessments.
  • Hurricane damage assessments, Melbourne, Fl.

Forensic Engineers Daytona.

  • Wind damage inspections and assessments, Melbourne
  • Building cladding wind damage
  • Roof damage assessments.
  • hurricane damage assessments in Jacksonville, Daytona, , Melbourne, Florida.
  • Building maintenance appraisals and recommendations.
  • Dilapidation surveys prior/post construction.
  • Building movement and underpinning.
  • Infrastructure damage and emergency management plans (buildings, bridges and other structures).
  • Hurricane building damage inspections, providing structural and building advice to property owners.
  • Our forensic engineers provide cause and origin, forensic buildings defects, construction defects, forensic investigations,site investigation, testing, technical research, and analysis of the information to provide our clients with an independent opinion on the cause of failure.

    Our team of experienced professionals offer the following areas of expertise:

    – Forensic Building Defects
    – Forensic Collapse & Insurance Claims and Reports
    – Structural Condition Assessments
    – Discovery Assistance
    – Second Opinion Structural & Forensic Inspections for Dispute Resolution.

    Forensic Engineers Expert Witness & Testimonial

    We provide structural & forensic damage assessment reports to insurance, as well as adjuster clients for building failures, natural disasters and failures due to under design. We also provide estimates for repairs based on original values and ASV. Whether the collapse is due to a design fault, natural disasters, deficient structural deign or over-stressing. we can inspect and find the cause and origin of various collapse, and damage origin as a result of storms and defects.

http://www.hotfrog.com/business/fl/melbourne/ema-structural-forensic-engineers_42294919

http://tupalo.com/en/melbourne-florida/ema-structural-forensic-engineers

http://www.zipleaf.us/Companies/EMA-Structural-Forensic-Engineers_24125

http://www.bigwigbiz.com/records.php?opt=search&id=67373

http://www.wampit.com/EMA-Structural-Forensic-Engineers-6465762.html

http://www.expressbusinessdirectory.com/Companies/EMA-Structural-Forensic-Engineers-C366421

https://www.callupcontact.com/b/businessprofile/EMA_Structural_Forensic_Engineers/6801848

http://www.find-us-here.com/businesses/EMA-Structural-Forensic-Engineers-Melbourne-Florida-USA/32698856/

https://www.chamberofcommerce.com/melbourne-fl/1332796926-ema-structural-forensic-engineers

The post Forensic Engineers Melbourne appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>
Damage Roof Inspections http://www.forensicengineerflorida.com/2016/10/12/damage-roof-inspections/ Wed, 12 Oct 2016 18:29:53 +0000 http://forensicengineerflorida.com/?p=1783 Damage Roof Inspections Visual Damage Roof Inspections Daytona, Palm Coast, Melbourne, Jacksonville are provided by licensed engineers and experienced technicians a ...

The post Damage Roof Inspections appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>

Damage Roof Inspections

Visual Damage Roof Inspections Daytona, Palm Coast, Melbourne, Jacksonville are provided by licensed engineers and experienced technicians a set of ‘eyes’ during all phases of the installation. Critical areas such as fastening patterns of underlying insulation, mopping techniques, or glue application and drying times can be monitored for compliance with the contract documents and manufacturer’s standards.

EMA’s Damage roof inspections have extensive experience  to observe all phases of a roof installation to ensure materials are in compliance with project documents. Prior to the start of work, our inspectors are provided specifications, drawings, shop drawings and submittal. The inspector’s attendance at the Pre-Job Conference with respective contractual parties allows a thorough understanding of the system installation, set-up areas and anticipated internal disruptions. The inspector generates Damage Roof Inspection Reports which delineates material and installation compliance, and documents any unforeseen contingent items to the contract. Non-compliance issues are immediately addressed with the roofing contractor, design professional or building owner to ensure proper installation of the specified roofing assembly. We provide roof inspection in, St. Augustine, Palm Coast, Palm Bay, Cocoa, Rockledge, Daytona Beach, Melbourne, Orlando, & Tampa.

Daytona roof inspections, tampa roof damage inspections
Damaged Roof inspections for residential and commercial structures

Inspections Daytona by Licensed Engineers.

EMA roof engineers can inspect and perform damaged roof inspections daytona, Cocoa, Ormond beach, Palm Coast on any roof system including concrete roofs, gravel and shingled roofs. After hurricanes, or natural disasters including lightening strikes the roof may get damaged. That is where we send our professional engineers and inspectors to do a thorough inspections of roofing and intent of damages for insurance claim purpose and repairs.

We also perform various structurally damaged roof inspections including initial tig-tag , structural in progress and structural final inspections for shingled, tile roofs. We also perform roof static uplift test TAS-105, TAS-106, Bell Chamber (TAS-124), Thermal Imaging etc. Various Services are performed and a Sealed and Signed report is prepared for the client.

We also perform damage roof inspections for all shingle, metal & clay tile or concrete tile roofs after any storm or hurricane as per Florida building code chapter 15. please call for our services.

daytona roof inspections
Damage roof inspections

Damage Roof Inspections & Testing.

EMA Engineers performs detailed, professional damage roof inspections in Volusia, Flagler, Duval, Indian River, Brevard, Orange, Polk, Lake counties with state-of-the-art moisture detection devices and gives thorough explanations with digital pictures.

Roof Damage Inspection Procedure.

The starting point of the roof Inspection Daytona should be the roof of the building. The interior walls and ceilings should be checked for signs of water staining. After inspecting the interior by a damaged roof inspections engineer   thorough inspection of the exterior walls should be made along with the roof system.

The following roof components should be inspected:

Flashing: These are the protection for the membrane termination and often provide a waterproof cover at the membrane termination. These include Counter- flashing, expansion joint covers, copings and flashing at walls and curbs. A variety of problems may occur at these vulnerable locations by damage roof inspections throughout East and Central Florida as well as Tampa, Orlando & Ft. Lauderdale.

Penetrations: These are pipes, drains, vents, stacks and other items that penetrate the roof membrane. These MUST be flashed properly to assure a watertight roof system by roof engineers.

Field Membrane – What to look for:

· Open seams excessive blisters, wrinkles, ridges or areas of non-adhered membrane.
· Worn spots holes or deteriorated areas of the membrane.
· Deteriorated, areas of surface coating on the membrane.
· Adequate, drainage and ponding problems of the membrane checked by roof inspections.
· Areas around rooftop equipment that may have been degraded by leaks or spills or punctured by dropped equipment parts.

How to Inspect damage Roof inspections Types

The first protection any house has against the elements is the roof and there are a variety of roofing materials. You can learn a few basics about each material that will help you spot damage that needs to be repaired or roofing that should be replaced as reported in roof inspections.

Shingles damage roof inspections

shingle inspections

Asphalt roofing surfaces are granular. When asphalt shingles age they become brittle from the sun and other elements. Then the granules can detach from the shingles. Check in the gutters and at the end of the downspouts for asphalt granule deposits. Inspect the roof for spots that look bare where all the granules have detached and been washed away. Also inspect for missing, torn or warped shingles. When the edges or corners of shingles are rising or curling, they have outlived their usefulness and will need replacing. Also look for indentations or punctures from hail damage. This can be far more costly than simply adding shingles so knowing how many layers are on the roof and the legal limitations can be valuable. You can commonly determine how many layers are present by examining the edge of the roof during damage roof inspections.

Metal Damage Roof Inspections

Metal roofs are commonly steel, copper, aluminum, or galvanized iron. Most metal roofs have a life expectancy of about 50 years. Perforations, pits, rust, or corrosion can help determine the age of the roof. Check the seams, corners, and joints for loose, dried out, or peeling caulk or other seam material while performing damage roof inspections.

Slate or Clay Tile metal Roof Inspections

tile damage inspections
ema structural engineers tile roof inspections

Damage Roof Inspections of 3 most common tile roof materials and these are concrete tile, clay or terracotta tile, and composite or light weight tiles. The most common tile is made of concrete and you can identify these roofs by the thickness and absence of color on the bottom or underside of the tiles. They often have 75 years or lifetime warranties. However they can leak sooner depending on the quality of workmanship. Local codes and the area of the country will require these tiles be attached with nails, construction adhesives, battens, screws, foam, or a combination of fasteners noted during damage roof inspections.

inspection for tiled roofs

Composite tile damage roof inspections are not as popular and are made to resemble clay tile. They are principally installed on homes that lack the structural ability to hold much heavier concrete. Composite tiles also cost less to install.

Clay tile roof inspections comes in two types: terracotta and sand cast. Terracotta tile look just like the material of clay flower pots. Sand cast tiles come in different colors noted during damage roof inspections.

Slate and clay tile roofs and even cement shingles are designed to last as long as the structure when cared for properly. However they can be broken by hail, ice, or by walking on them. Avoid walking on these materials and use a drone or binoculars to look for any missing tiles or ones that are chipped or broken roof inspections.

wood shake roofs

This is another roofing material you should not be walking on. Inspect these roofs from a ladder, with binoculars or a drone camera. Wooden shakes are split by hand, and wood shingles are sawed and tapered. Weather will deteriorate wood shakes and shingles over time. See if there are missing rotted, warped, or broken shingles or shakes. As a general rule of thumb if a third or more of these roofs are damaged, the whole roof needs replacement.

http://pntscr.com/cqt1b3http://b2b.bridgat.com/u99512

http://fonolive.com/b/us/jacksonville-fl//17856019/ema-structural-forensic-engineers

http://linktown.khou.com/biz/ema-structural-forensic-engineers/jacksonville/fl/32266/68878032

The post Damage Roof Inspections appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>
Roof Inspections Jacksonville http://www.forensicengineerflorida.com/2016/10/12/roof-inspections-jacksonville/ Wed, 12 Oct 2016 18:03:26 +0000 http://forensicengineerflorida.com/?p=1779 Roof Inspections Jacksonville Roof inspection jacksonville engineers can inspect and perform damaged roof inspections in Jacksonville, Cocoa, Ormond beach, St. Augustine, ...

The post Roof Inspections Jacksonville appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>

Roof Inspections Jacksonville

Roof inspection jacksonville engineers can inspect and perform damaged roof inspections in Jacksonville, Cocoa, Ormond beach, St. Augustine, Cocoa, Melbourne,& Palm Coast on any roof system including concrete roofs, gravel and shingled roofs. After hurricanes, or natural disasters including lightening strikes the roof may get damaged and may need a roof inspections jacksonville visit. That is where we send our professional engineers and inspectors to do a thorough inspections of roofing and intent of damages for insurance claim purpose and repairs.

We also perform various structurally damaged roof inspections including initial tig-tag , structural in progress and structural final inspections for shingled, tile roofs. We also perform roof static uplift test TAS-105, TAS-106, Bell Chamber (TAS-124), Thermal Imaging etc. Various Services are performed and a Sealed and Signed report is prepared for the client.

We also perform wind damaged roof inspections jacksonville roofing inspections for all shingle, metal & clay tile or concrete tile roofs as per Florida building code chapter 15. please call for our services.

daytona roof inspections
roof inspections for roof damages by windstorms

Roof Inspections Jacksonville & Testing.

EMA Engineers performs detailed, professional visual roof inspections Jacksonville with state-of-the-art moisture detection devices and gives thorough explanations with digital pictures.

TAS 105 – Fastener Withdrawal Resistance Testing
TAS 106 – Uplift Resistance Testing Tile Roof by Roof Inspections Jacksonville.
TAS 109 – Polyurethane Foam Roofing (pending certification).
TAS 124 – Existing and New Roof Wind Uplift Resistance Testing.

Roof Inspections Jacksonville INSPECTION PROCEDURES

The starting point of the roof Inspection Jacksonville is the roof of the building. The interior walls and ceilings should be checked for signs of water staining. After inspecting the interior by a damaged roof inspections daytona engineer   thorough inspection of the exterior walls should be made along with the roof system.

The following roof components should be inspected:

Flashing: These are the protection for the membrane termination and often provide a waterproof cover at the membrane termination. These include Counter- flashing, expansion joint covers, copings and flashing at walls and curbs. A variety of problems may occur at these vulnerable locations by damaged roof inspections Jacksonville in Central Florida as well as Tampa, Orlando & Ft. Lauderdale.

Penetrations: These are pipes, drains, vents, stacks and other items that penetrate the roof membrane. These MUST be flashed properly to assure a watertight roof system by roof engineers.

Field Membrane – What to look for:

· Open seams excessive blisters, wrinkles, ridges or areas of non-adhered membrane.
· Worn spots holes or deteriorated areas of the membrane.
· Deteriorated, areas of surface coating on the membrane through roof inspections jacksonville.
· Adequate, drainage and ponding problems of the membrane checked by roof inspections Daytona.
· Areas around rooftop equipment that may have been degraded by leaks or spills or punctured by dropped equipment parts.

Roof Inspections Jacksonville.

Roof inspections jacksonville Service is recognized by the roofing industry as a vital component of successful Roof Construction Management. Many vital areas of a roof installation are not visible for inspection upon completion and many times are already covered over before periodic site inspections can be made.

Full-time roof inspection jacksonville Inspection provides a set of ‘eyes’ during all phases of the installation. Critical areas such as fastening patterns of underlying insulation, mopping techniques, or glue application and drying times can be monitored for compliance with the contract documents and manufacturer’s standards by roof inspections jacksonville.

Count On EMA and Our Trained Roof Inspectors
EMA’s roof inspectors have extensive experience  to observe all phases of a roof installation to ensure materials are in compliance with project documents. Prior to the start of work, our inspectors are provided specifications, drawings, shop drawings and submittals. The inspector’s attendance at the Pre-Job Conference with respective contractual parties allows a thorough understanding of the system installation, set-up areas and anticipated internal disruptions. The inspector generates Daily Roof Inspection Reports which delineates material and installation compliance, and documents any unforeseen contingent items to the contract. Non-compliance issues are immediately addressed with the roofing contractor, design professional or building owner to ensure proper installation of the specified roofing assembly. We provide roof inspections jacksonville, St. Augustine, Daytona Beach, Melbourne, Orlando, & Tampa.

ttps://plus.google.com/109108893098752996440/about

https://foursquare.com/v/ema-structural-forensic-engineers/57f67a4f498e015eb5f61376

http://prntscr.com/cqmbgvhttp://prntscr.com/cqlynh

http://directory.wfaa.com/biz/ema-structural-forensic-engineers/jacksonville/fl/32266/68878032

http://tupalo.com/en/jacksonville-florida/ema-structural-forensic-engineers

http://prntscr.com/cqm9hd

http://ezlocal.com/fl/jacksonville/structural-engineer/1680919

http://linktown.khou.com/biz/ema-structural-forensic-engineers/jacksonville/fl/32266/68878032

The post Roof Inspections Jacksonville appeared first on EMA Structural engineers Orlando, Forensic Engineers Jacksonville, Structural Engineers Jacksonville, Forensic Engineers Jacksonville, structural engineers Melbourne,, forensic engineers Orlando, structural engineers Cocoa, Forensic engineers Orlando, Structural Engineers Tampa, Forensic Engineers Tampa..

]]>